This is a full package (aircraft and panel) for FSX and it works also on FS 2004.
(PLEASE READ NOTES AT THE BOTTOM OF THIS PAGE BEFORE INSTALLING ON FSX)
DO NOT INSTALL THIS FILE ON FSX IF YOU DON'T FEEL SURE ABOUT NOTES 1 AND 2
HISTORY
========
The Siai-Marchetti SF-260 is a light aircraft marketed as Light attack/aerobatic military trainer. It was designed by (the great) STELIO FRATI. First flight of the prototype on July 15, 1964.
The SIAI-Marchetti purchased the design, soon after the tests, and started the production. The military versions are popular with smaller air forces, can be armed for close-support role. The SF.260 is also popular among many AeroClubs around the world and it might be flown in California with ''USA Air Combat...Fighter Pilot for a Day''.
Thank you for downloading this package, i hope you'll enjoy it.
IMPORTANT!
===========
You MUST insert the enclosed 'GougeSound.dll' in the Main (FSX/FS2004) folder , or you might experience a FS crash!!
THIS FILE IS FREEWARE ONLY!
=========
FOREWORD
========
The model :Features , the usual animations, such as flight controls, spinning wheels, pilot scannig the sky etc,
plus two textures, the orange texture is the Italian Air Force test pilots scool the other is the 'Usa Air Combat' livery that i tried to imitate.
The textures and panel have been created entirely from drawings or photos found on internet or shots taken by myself .
The Virtual Cockpit is provided with working essential gauges and animated flight controls.
The ''Virtual Cockpit Panel'' is made as per ''Italian Air Force panel'' with the main pilot station on the right seat.
The 2D panel is the ''mooney_Bravo'' panel with some small changes since the SF-260 and the ''mooney_Bravo'' panels are very similar.
Some special gauges have been created by Capt. Italo D'Attomo, while the others are default FSX gauges.
INSTALLATION
============
Step1): Unzip this file into your flight simulator X airplanes folder (or fs9 aircraft folder) and you will find a SIAI-Marchetti SF-260 folder with the usual subfolders, and a 'GougeSound.dll', then operate as follows:
Step2) Copy/Paste the 'GougeSound.dll' in your MAIN flight simulator X or fs9 folder (if you don't have it yet).
Nothing else is required for installation procedure.
TIPS
====
FS2004 users will find this plane listed in the Aircraft Manufacturer as "SIAI-MARCHETTI-AERMACCHI".
Please do not hesitate to use elevator trim very often as required to fly the plane hands-off.
Flying on virtual cockpit you can move the eyepoint as required for better vision (check your eyepoint keyboard on FS options\controls\assignements for the keys required to move the 'eyepoint of view' (left/right/up/down/back or forward).
For Camera definitions (FSX only), please use ''A'' key to cycle views within a category and 'S' to change category (check the quick reference key commands).
CREDITS
=======
I deeply thank:
Capt. Italo D'Attomo, for creating the special gauge.
DISCLAIMER
==========
THE PANEL AND MODEL HAVE BEEN TESTED MANY TIMES TO ENSURE THE PROPER OPERATION OF THIS SOFTWARE, AND ALL IS DONE TO AVOID ERRORS.
I WILL NOT ACCEPT ANY RESPONSIBILITY FOR CONSEQUENTIAL INCIDENTAL OR ANY SYSTEM DAMAGE DUE TO THE FAILURE OR IMPROPER OPERATION OF THE SOFTWARE. THERE IS NOT ANY WARRANTY EXPRESSED OR IMPLIED FOR ANY CIRCUMSTANCE.
THIS FILE IS FREEWARE: NOT TO BE SOLD!
Author Giovanni Quai
Comments and suggestions are greatly appreciated.
giovanni.quai@tin.it
I grant permission for repainting purposes only.
Please DO NOT upload the entire airplane...upload your work only.
NOTE:
I installed succesfully this model on FS2004, FSX Deluxe Edition and FSX Gold plus Acceleration simply following the above installation procedure.
NOTE 1: Loading the aircraft for the first time on FSX you will get an 'unknown author' message for each (1) gauge. Click 'YES' if you like the gauge or 'NO' if you don't. If you say 'NO' you will not have the instrument displayed on the panel, but the default ones only.
NOTE 2: You will get a second message asking you to "trust" the related gauge; if you click "Yes" when asked, you will never be asked again.
PLEASE READ CAREFULLY BOTH MESSAGES
Note 3: If you want to see a different panel, copy or aliase a panel of a single engine prop. of your choice: in this case, the VC will not be shown correctly.
You might also create a panel by removing our gauges and installing your preferred.
Note 4: Installing & using this package is at your own risk.
Note 5: FSX-Settings\Display\Graphics; selecting ''Light_Bloom'' check box, in the global options window, might not be compatible with our model and the selected plane may not appear.
